Hold a panel a few inches above the backplate and align the two as you slide the panel down.  The backplate's two t-caps will slip into the panel's keyholes. Pull the panel down until its edges line up with the backplate. 

TIP: When installing multiple rows be sure to hang panels starting with the bottom row first, working your way up to the top row.


*A Phillips screwdriver is all that is required for standard drywall installation.

If you happen to place an anchor hole over a wood stud, you will need a handheld drill. Use the included wood screw in place of the anchor.

For installation on walls made of other materials (brick, tile, etc) you will require alternative anchors/tools available at your local hardware store.