When hanging a series of multiple cases attach each subsequent cabinet frame using the provided "H" links.

Attach each cabinet frame to wall as instructed in steps 1-7, just remember to remove the link from the backplate and position it in one of the four side pockets depending on where you plan to hang the next case.

Once all cABINET frames are hung on the wall complete step 8.

*A _" Phillips screwdriver are all that is required for standard drywall installation.

If you happen to place an anchor hole over a stud, you will need a handheld drill and a _/_" bit. Use the included wood screw instead of the drywall anchor.

For installation on walls made of other materials (brick, tile, etc) alternative anchors are required and should be available at your local hardware store.